Awaiting product image

Parker 50P310QEL50YY1

(Hydraulic Filter: Parker Brand Specific)

£3155.63 Excl. VAT

0 in stock
Any further stock usually 6-8 weeks

Updated:

Specifications

Our Part NumberFPK-50P310QEL50YY1
Manufacturer’s Part Number 50P310QEL50YY1
TypeHydraulic Filter
Micron Unspecified

Description

FILTER-Hydraulic(Brand Specific) Product – Brand Specific Parker – Element

Product Hydraulic filter product
Details High Pressure Inline/Reverse Flow Filter 50P Series – 50P310QEL50YY1
Parker 50P High Pressure Filter Series is fully customizable with reverse flow capability to meet any system needs. Meeting SAE HF4 Automotive Standards. Max allowable operating pressure 5000 PSI/344.8 BAR and flow rates to 130GPM/492 LPM.
Port Connection Type SAE 1½ code 62 flange
Options None
Indicator Type electrical indicator with wire leads and conduit connection, left side
Flow Rate 120 gpm (454 lpm)
Bypass Valve Pressure Rating 50 psi (3.4 bar)
Seal Material Nitrile
Filter Element Type 10Q Microglass
Indicator Pressure Setting 42 psid (2.9 bar)
Mounting Style Inline
Pressure Rating 5000 psi (344 bar)
Flow Rate 120 gpm (454 lpm)
Filter Element Type 10Q Microglass, cartridge
Seal Material Nitrile
Port Type SAE 1½ code 62 flange
Indicator Type electrical indicator with wire leads and conduit connection, left side
Options None
Housing Material ductile iron
For Fluid Type Mineral and Petroleum Based Fluid
Maximum Operating Temperature 225 F (107 C)
Weight 95 lbs (43 kg)
Compatible Element 933488Q
Product Style Hydraulic Filter
Product Type Hydraulic Filter
Safety Warning
Item Information
Modern high pressure hydraulic systems are demanding. Better controls and long component life are expected. To deliver the high standards of performance, hydraulic components are built with tighter tolerances increasing their sensitivity to contamination.
That's where Parker Pressure Filters come into play. Pressure filters are used to protect downstream components from contamination, protecting these critical components from catastrophic failure. They filter out ingressed contamination before it jams a valve or scores a cylinder. They block pump-generated debris before it gets to servo or proportional valves.
The design objective for all Parker filters is to achieve a sensible balance between cost and performance. Using state of the art technology to arrive at innovative yet practical designs, offers a cost effective option for both OEM's and users alike. Parker Pressure Filters are a key ingredient in meeting today's system demands.
The Parker 50P High Pressure Filter Series allows for each filter to be customized, closely matching any specific system needs. Choose the options which best fit your application. No need to waste money on features you don't need!
Design
The Parker 50P Series High Pressure Filters are base mounted, which provides several possible advantages. The bowl up mounting makes servicing the elements quick and easy. Simply remove the top cover to access the element. A drain port is provided to allow the oil to be removed from filter prior to element servicing. This design reduces the possibility of oil spillage and injury to maintenance personnel.
The Parker 50P Series has optional manifold porting for space saving design that reduces the number of fittings and potential leak points. The porting is also designed to match the installation of many other manufacturers.
Available in single, double, and triple lengths, and utilizes Microglass III media in 2, 5, 10 and 20 microns for the industry's best particle removal efficiency and retention. Most significant to note, the Parker 50P Series meets the SAE HF4 automotive standard, ensuring the safety, quality and effectiveness of products.
50PR Reverse Flow Filter
Also Available The Parker 50PR – designed specifically for hydrostatic transmission loops because of its capability to handle reverse flow.
Closed circuit HSTs frequently reverse direction causing flow to reverse in the fluid lines. Pressure filters installed between pump and motor must be able to handle reverse flow without having contaminant washed off of the elements and back into the system. To prevent such an occurrence, the filters require the use of internal check valves to direct the flow through the element in one direction and around the element in the other. Parker's internal check valve design minimizes additional pressure loss and eliminates the cost associated with external valves and fittings. Also the internal design keeps the envelope dimensions of the filter to a minimum as can be seen on the installation drawing.
Features and Benefits
– Meets SAE HF4 Specification for Automotive Uses
– O-Ring Seal
– Positive o-ring Sealing for Optimum Element Efficiency
– Plastic End Caps
– Laser Marked for Clear Long-Lasting Identification – Excellent Corrosion Protection
– Spiral Support Cylinders
– High Strength Consistent Support
– Continuous Length Elements Eliminates Leak Points and Increases Surface Area
– Base Mounted Filter
– No brackets required for installation, reducing costs
– Top Access Cover
– Removes element from top, reducing mess
– Lighter than removing the entire bowl
– Visual and Electrical Indicators
– Know exactly when Element service is required
– Drain Port
– Drain all Oil from Assembly Prior to Servicing, Eliminates Cross-Contamination
– Vent Port
– Purges all Trapped Air in Filter, Achieving Maximum Element Performance and Prevents a “Spongy” System
– Microglass III Elements – Available in Four Different Micron Sizes
– Documented Consistent Performance, Backed by Recognized Test Standards – Providing Reliability
– Multi-Layer Media – Offering High Capacity and Efficiency
– Wire Reinforced Pleats – No Performance Loss from Pleat Bunching
Typical Applications
– Automotive specified equipment
– Hydrostatic transmission circuits
– Servo and proportional controls
– Offshore drilling rigs
– Mining equipment
– Power units

Manufacturer's Data

  Parker Website Data

  Parker Website Technical

BrandPart number
Placeholder Amazon B0CVNGTF5M
View
Placeholder Inline FPK-50P310QEL50YY1
View
Placeholder Parker 50P310QEL50YY1
View

Parker Brand Specific Filters

We offer Parker Filters as Brand Specific

All Parker Brand Specific orders are supplied with genuine Parker  Filters

Buy Genuine Parker Filters with Confidence – We are UK’s leading Filter Specialists

Parker’s strength is in their huge diversity of Filtration Products that crossover into many other industrial markets

We are Parker ‘s Official UK Distributors for their HIFE – Hydraulic & Industrial Process Filtration EMEA division

CataloguesView all our catalogues for Parker
More InfoAll Parker products
OUR WEBSITE DATA

Data within our Vehicle Application, Cross Reference, Filter Kit and Size listings are provided as a guide only, for full compatibility ensure all our specifications match your requirements.

OUR INLINE PART NUMBERS

Inline Filters full internal Part Numbers are prefixed with FIN e.g. FIN-FF33333 and carry the bulk of our Catalogue information which includes Cross Reference, Vehicle Applications, Size and Specifications data.

These Filters will always be sourced from a quality brand but are not Brand Specific, this enables us to offer our Inline range of Filters at the best Price point and with the best current Stock availability. As these are our fastest moving items the Manufacturer, Picture and exact Size may vary then we can second source if necessary to complete orders quickly. Subsequently, although shipping a mix of brands for the same part is rare, it is a possibility.

Be assured we only supply quality Filter Brands from globally recognised Filter Manufacturers, we do NOT supply own branded filters of unknown origin. Our primary Filter sources are Fleetguard, Baldwin, Mann, Racor and Parker with second sourcing from Alco, MP Filtri, SF Filter, Solberg, Vokes and Wix.

BRAND SPECIFIC PART NUMBERS

These are Brand Specific products so you will receive a genuine Filter of the Brand specified NOT an alternative.

Our full internal Part Numbers for these Brand Specific products have a prefix added to the Manufacturer’s Part Number, this helps us separate them out within our extremely complex database systems: FBW-Baldwin | FFG-Fleetguard | FMH-Mann | FMP-MP Filtri | FPK-Parker | FRC-Racor | FSB-Solberg | FVK-Vokes.

Photographs of Brand Specific filters are supplied by the relevant manufacturer. These product pictures can differ slightly to the product supplied if it happens to be made in one of their other manufacturing plants throughout the world.

BUSINESS MODEL

We sell on a Business to Business model with highly competitive Trade Pricing. As the bulk of our business is to trade customers all our prices are quoted exclusive of VAT.

ORDERS

All orders must be placed via the Website. Orders placed for non stock items are Special Orders and once ordered cannot be cancelled or returned.

LINKS

Customers also bought...

Recently viewed items...